ESP32-DIV: Your Swiss Army Knife for Wireless Networks
ESP32-DIV: Your Swiss Army Knife for Wireless Networks
Couldn't load pickup availability
-92%
The ESP32-DIV and shell are based on the original open-source design and may contain unresolved software limitations. Please read carefully before ordering.
- Memory card related code needs improvement.
- Battery capacity detection related code needs improvement.
- Touchscreen related code needs improvement.
- NRF24 related code needs improvement (only 2 of the 3 NRF24 modules may be effective).
- Overall UI/UX operation logic needs improvement.
By placing an order, you confirm that you understand and accept all the issues listed above. Refund requests based on these known issues will not be accepted.
A portable ESP32-based wireless development and experimentation kit featuring multiple RF modules, a color touchscreen, physical controls, battery power, and USB-C charging. Designed for education, research, and embedded development.
What This Kit Includes
- • ESP32 module with built-in Wi-Fi & Bluetooth (BLE)
- • 3 × NRF24 2.4GHz RF transceiver modules
- • 1 × CC1101 Sub-1GHz RF transceiver module
- • 2.8-inch color touchscreen display
- • Physical D-PAD control buttons
- • MicroSD card slot
- • 18650 battery holder with onboard charge management
- • USB Type-C port for power and data
- • 2 × Infrared (IR) transceiver LEDs
- • Protective shell / enclosure
Note: 18650 battery cell and MicroSD card are not included unless explicitly stated.
Technical Specifications
- 2.4GHz RF support via NRF24 modules (2.400 – 2.525 GHz)
- Sub-1GHz RF support via CC1101 (region-dependent bands)
- ESP32 wireless: Wi-Fi + Bluetooth Low Energy (BLE)
- Portable, battery-powered operation
Product Rights & Open-Source Credits
This product is a third-party hardware kit. The software framework and project known as ESP32-DIV were originally developed and are maintained by CiferTech.
- Official website: https://cifertech.net
- GitHub repository: https://github.com/cifertech/ESP32-DIV
The ESP32-DIV project is released under the MIT License. All copyrights and credits belong to the original authors.
This hardware is not manufactured, endorsed, or officially supported by CiferTech. Names and references are used for compatibility and attribution only.
⚠️ Legal Disclaimer:
This product is intended for educational, research, and lawful development use only. The user is solely responsible for complying with all local laws, regulations, and radio-frequency rules. The seller assumes no liability for misuse.
🧠 Microcontroller: ESP32-PICO-V3-02 (Wi-Fi + BLE)
📺 Display: 1.14" IPS LCD (135×240)
🔋 Battery: 200mAh Li-Po, rechargeable via USB-C
⚙️ Port: USB Type-C (5V input)
💾 Storage: Flash memory with script support
📡 Connectivity: Wi-Fi 802.11 b/g/n + Bluetooth 4.2
🧩 Expansion: Grove port, GPIO headers
📏 Dimensions: 48.2 × 25.5 × 13.7 mm
T6Shark Plus
Both theCC1101chip and the antenna are designed to operate at frequencies in the 300-348 MHz, 387-464 MHz, and 779-928 MHz bands.
Ethical Hacking & Security Research
Wireless Security Analysis
Perform legal network scanning and penetration testing with ESP32's Wi-Fi/Bluetooth capabilities
Customizable Scripts
Develop security tools using Arduino IDE, MicroPython, or UIFlow for ethical hacking purposes
Portable Penetration Kit
Compact design for on-site security audits and vulnerability assessments
Sensor Integration
Use built-in sensors for environmental monitoring during security operations