
TDeck plus is a powerful, all-in-one ESP32-S3 development board with an integrated keyboard, touchscreen, LoRa module, and GPS support. Designed for portable prototyping, mesh networking, and off-grid communication, it combines functionality and flexibility in a compact handheld form.
Key Features of TDeck plus:
- ESP32-S3 dual-core 240MHz processor with 16MB Flash and 8MB PSRAM
- 2.8-inch IPS touchscreen (320×240 resolution, capacitive)
- Full QWERTY keyboard with backlight and multi-function keys
- Integrated GC2145 2MP camera module
- Speaker (MAX98357A) and dual MEMS microphones (ES7210 codec)
- Wi-Fi 4 (802.11 b/g/n) + Bluetooth 5.0 BLE/Mesh
- LoRa SX1262 module (+22 dBm) supporting 433/868/915 MHz bands
- GPS supported via Grove UART port (external module optional)
- 2000mAh rechargeable battery with TP4065B charger and battery monitoring (IO04)
- MicroSD card slot for additional storage
- Expansion: GPIO, I2C, SPI, Grove connector
- USB-C port with USB Host support
Developer-Ready for All Projects:
TShark Plus supports Arduino IDE, PlatformIO, and MicroPython. It’s fully open-source with sample code and schematic files available on GitHub. Whether you're building a mesh communicator using Meshtastic or a portable UI-based IoT controller, this device delivers.
Example Use Cases:
- 📡 Off-grid communication (Meshtastic)
- 🛰️ GPS-based tracking devices
- 🎛️ Handheld IoT controller interfaces
- 🛠️ Wireless test and dev tools
- 🎮 Retro-style portable dev consoles
⚠️ Legal Disclaimer:
TShark Plus is a developer tool. Use of its wireless features must comply with local laws. Unauthorized transmission, GPS spoofing, or network intrusion is illegal and strictly prohibited. Always test responsibly.
- Display: 1.14" IPS LCD (240×135 px, ST7789V2)
- MCU: ESP32-S3FN8 (Xtensa® LX7 dual-core @240MHz)
- Memory: 8MB PSRAM + 16MB NOR Flash
- Connectivity: Wi-Fi 802.11 b/g/n + Bluetooth 5.0 LE
- Keyboard: QWERTY Layout + 5-Way Joystick
- Audio: 1W I2S Speaker (NS4168) + MEMS Microphone (SPM1423)
- Storage: MicroSD Card slot (FAT32 supported)
- Expansion: HY2.0-4P Grove Port (I²C/UART)
- USB: USB-C (Power, Data, Flashing)
- Battery: 120mAh Internal LiPo
- IR: Infrared LED (410cm @0°, 170cm @45°, 66cm @90°)
- Dimensions: 84 × 54 × 19.7 mm
- Weight: ~90g
- Firmware: UIFlow2, Arduino IDE, MicroPython, ESP-IDF
- Extra: Magnetic base, LEGO mount holes, RGB LED
M5Shark Toolkit
All-in-one ethical hacking device — compact, powerful, beginner-friendly, and made for real-world testing.
M5SHARK Plus
Both theCC1101chip and the antenna are designed to operate at frequencies in the 300-348 MHz, 387-464 MHz, and 779-928 MHz bands.
Ethical Hacking & Security Research
Wireless Security Analysis
Perform legal network scanning and penetration testing with ESP32's Wi-Fi/Bluetooth capabilities
Customizable Scripts
Develop security tools using Arduino IDE, MicroPython, or UIFlow for ethical hacking purposes
Portable Penetration Kit
Compact design for on-site security audits and vulnerability assessments
Sensor Integration
Use built-in sensors for environmental monitoring during security operations